The jacket is made of a mixture of polyester and cotton. Compilation of synthetic and natural fibers creates a fabric that provides excellent protection against adverse weather conditions (rain, wind). Polyester makes the material you do not overreach too much. Cotton provides optimal airflow, which prevents overheating of the body. The jacket is fastened with a zipper. Acrylic lining is maintained in an elegant British style. The inside of the sleeves is padded with a slippery fabric for easy fitting and removal of the jacket.
The sleeves and underside of the jacket are covered with elastic ribbing to protect against the freezing wind. The contents of the two outer pockets are protected by straps fastened with tapes. The jacket is also fitted with an inside pocket under the left flap.
|Size||Total length (cm/in)||Chest circumference (cm/in)||Sleeve lenght - armpit to cuff (cm/in)|
|S||60 cm (23,5")||116 cm (45,5")||53 cm (20,5")|
|M||65 cm (25,5")||120 cm (47")||54 cm (21")|
|L||67 cm (26")||122 cm (48")||54 cm (21")|
|XL||68 cm (26,5")||130 cm (51")||56 cm (22")|
|XXL||70 cm (27,5")||136 cm (53,5")||57 cm (22,5")|
|3XL||76 cm (30")||142 cm (56")||59 cm (23")|
INSTRUCTIONS: HOW TO MEASURE
Please read the following instructions to be sure you buy a product that will fit well.
Place a garment that fits you well on a flat, even surface (e.g. table, floor, bed) and take its measurements.
Remember to measure without stretching the material!
1. Total length
Place the garment facing surface and measure the length in a straight line from collar seam to the bottom of the measured item.
2. Chest measurements
Place the back of the garment on the surface and measure the width between the seams in the armpits. Multiply this value twice to get the chest measurements.
3. Sleeve length from armpit
Place the back of the garment on the surface and measure the length from the armpit seam to the end of the sleeve cuff.
What if you are between two sizes? It's easy. If you prefer more fitted clothes, choose a smaller size. If you prefer to be a little looser, go for the larger size.
THE TOLERANCE FOR THE DIMENSIONS GIVEN IN THE TABLE IS +/- 2 CM.